Pppoe; Snmp - Abus IPCS82500 User Manual

7.5.2.4 PPPoE

The PPPoE protocol makes it possible to connect the camera to a provider modem directly. An
additional router is not required.
Enable PPPoE:
Dynamic IP:
User name:
Password:
Confirm:

7.5.2.5 SNMP

SNMP (Simple Network Management Protocol)
The SNMP protocol enables central network management of network components.
Enable SNMPv1:
Enable SNMPv2:
Write SNMP Community:
Read SNMP Community:
Trap Address:
Trap Port:
Trap Community:
Enable SNMPv3:
Read UserName:
Security level:
Authentication algorithm:
Authentication Password:
Private-key Algorithm:
Private-key password:
Write UserName:
Security level:
Authentication algorithm:
Authentication Password:
Private-key Algorithm:
Private-key password:
enable the PPPoE function
display of the dynamically determined public IP address
input of the user name from the provider (ISP)
input of the password from the provider (ISP)
Password confirmation
enable the SNMPv1 function
enable the SNMPv2 function
SNMP Community string for writing
SNMP Community string for reading
IP address of the TRAP server
Port of the TRAP server
TRAP Community string
Enabling of SNMPv3
Allocate user name
auth, priv: no authentication, no encryption
auth, no priv.: authentication, no encryption
no auth, no priv.: No authentication, encryption
Select authentication algorithm: MD5, SDA
Password assignment
Select encryption algorithm: DES, AES
Password assignment
Allocate user name
auth, priv: no authentication, no encryption
auth, no priv.: authentication, no encryption
no auth, no priv.: No authentication, encryption
Select authentication algorithm: MD5, SDA
Password assignment
Select encryption algorithm: DES, AES
Password assignment
95