Tasks; Reset Ptz Settings - Abus IPCS82500 User Manual

Auto-scan:
Frame scan:
Random scan:
Patrol:
Pattern:
Preset:
Panorama scan:
Tilt scan:

7.5.7.6 Tasks

Function for performing a certain action in a defined amount of time (using a time schedule)
Enable scheduled tasks:
Park time:
Auto-scan:
Frame scan:
Random scan:
Patrol:
Pattern:
Preset:
Panorama scan:
Tilt scan:
Restart Dome:
Adjust Dome:
AUX output:

7.5.7.7 Reset PTZ settings

Reset PTZ settings to factory settings (e.g. presets, patrols)
horizontal scan (360°, continuous). The speed can be set from the basics
menu.
horizontal scan, pausing for 4 seconds every 90°.
scan at random.
start a configured patrol.
start a configured pattern.
retrieve a preset (preset position).
diagonal scan (360° horizontal, 0~90° vertical, continuous).
horizontal scan (0~90°).
Enable all tasks configured in the time schedule.
This is the amount of time that must pass after manual PTZ control
before the planned task function can be re-enabled (5–720 seconds).
horizontal scan (360°, continuous). The speed can be set from the
basics menu.
horizontal scan, pausing for 4 seconds every 90°.
scan at random.
start a configured patrol.
start a configured pattern.
retrieve a preset (preset position).
diagonal scan (360° horizontal, 0~90° vertical, continuous).
horizontal scan (0~90°).
restart the camera.
initialise the PTZ Dome.
switch a relay output.
107