Sharp DV-600S Service Manual page 32

DV-600S
DV-600H
Pin No. Pin name
Video interface · OSD interface
C2
109
(OSDPEL2)
C1
110
(OSDPEL1)
C0
111
(OSDPEL0)
Pin No. Pin name
Video interface
84 VCLK
85 VMASTER
87 VDEN#
88 CBLANK
89 VSYNC
90 HSYNC
91 FI
92
94-97 Y[7:0]
99-101
124 VCLK X 2
Pin No. Pin No. Pin name Pin name
Audio interface
112 AIN
114-116 AOUT[2:0]
S/PDIF
117
(AOUT[3])
118 ALRCLK
119 ABCLK
132 AMCLK
Video/OSD interface terminal list
Type Direction
Video8 register = 0
3-S O Color difference signal output terminal of 2th bit.
(3-S) (I) Video8 register = 1
It works as the OSD pallet data input terminal of 2rd bit.
Video8 register = 0
3-S O Color difference signal output terminal of 1th bit.
(3-S) (I) Video8 register = 1
It works as the OSD pallet data input terminal of 1rd bit.
Video8 register = 0
3-S O Color difference signal output terminal of 0th bit.
(3-S) (I) Video8 register = 1
It works as the OSD pallet data input terminal of 0rd bit.
Video interface terminal list
Type Direction
3-S I/O Clock gained by dividing VCLK x 2 signal into halves.
Input terminal to switch video master/slave.
VMASTER=L
Video master mode. Video synchronizing signal and video clock are
I I internally generated.
HTYPE=H
Video slave mode. Video synchronizing signal and video clock are re
ceived from the external.
Video output enable input terminal
VDEN#=H
Y [7:0] and C [7:0] terminals are made to be disable (3-state).
I I VDEN#=L
Y [7:0] and C [7:0] terminals are made to be enable.
Note: C [7:0] terminal is the multiplexed terminal as OSDPLT [3:0] and so on.
For Video8 register = 0, VDEN# terminal is valid for Y [7:0] alone.
Composite blank output terminal. Horizontal/vertical blanking area and
O O
polarity are programmable.
Input/output terminal of vertically synchronous signal. Polarity and synchronous
3-S I/O
signal length are programmable.
Input/output terminal of horizontally synchronous signal.Polarity and
3-S I/O
synchronous signal length are programmable.
Input/output terminal for identification of even/odd number field. Polarity is
3-S I/O
programmable.
Video8 register = 0
Brightness signal output/input terminal.
3-S O
Video8 register = 1
Brightness/color difference multiplex terminal as ITU-T656
3-S I/O Terminal to input video clock or output 27 MHz.
Audio interface terminal list
Type Type Direction Direction
Audio (PCM) input terminal.
I I
Stereo x1
Audio (PCM) output terminal.
O O
Stereo x3
S/PDIF output terminal AC-3 stream or PCM stream can be output.
O O
Moreover, it works as the audio output terminal of 7th and 8th channels
Left/Right clock output terminal of AOUT [2:0] and AIN.
O O
The polarity is programmable.
Bit clock output terminal of AOUT [2:0] and AIN.
O O
The polarity is programmable.
Audio master clock input/output terminal.
3-S I/O
256 Fs or 386 Fs can be used.
Function
Function
Function
11-15