Table of Contents

Advertisement

CLOCK

1
4
3
Setting the clock
With the ignition on, deselect the
radio function.
Press button 2 (DSP) and button 4
(SEL) simultaneously until you hear
a beep. You can then set the time.
To skip through the hours, press
button 1 (forward arrow).
To skip through the minutes, press
button 3 (back arrow).
2
5
Setting the clock
With the ignition on, select display
6 showing total mileage and clock.
There are two methods for setting
the time:
- one long press on button 5 allows
you to scroll through the hours
and minutes quickly;
- short presses on button 5 allow
you to set the time minute by
minute.
6
If the electrical supply is cut
(battery disconnected, feed wire
broken, etc.), the clock will not
display the correct time.
The clock must be reset.
For your safety, we recommend
that you do not carry out
corrections while driving.
1.27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents