Package Contents - DeWalt DC509 User Manual

E N G L I S H
4 Dress properly
Do not wear loose clothing or jewellery, as
these can be caught in moving parts or caught
by the airflow. Wear protective hair covering to
keep long hair out of the way. When working
outdoors, preferably wear suitable gloves and
non-slip footwear.
5 Personal protection
Always use safety glasses. Use a face or dust
mask whenever the operations may produce
dust or flying particles. If these particles might
be considerably hot, also wear a heat-resistant
apron. Wear ear protection at all times. Wear a
safety helmet at all times.
6 Guard against electric shock
Prevent body contact with earthed surfaces
(e.g. pipes, radiators, cookers and refrigerators).
When using the tool under extreme conditions
(e.g. high humidity, when metal swarf is being
produced, etc.), electric safety can be improved
by inserting an isolating transformer or a (FI)
earth-leakage circuit-breaker.
7 Do not overreach
Keep proper footing and balance at all times.
8 Stay alert
Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.
9 Use appropriate tool
The intended use is described in this instruction
manual. Do not force small tools or attachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for which
it was intended. Do not force the tool.
WARNING! The use of any accessory or
attachment or performance of any operation
with this tool other than those recommended
in this instruction manual may present a risk of
personal injury.
10 Check for damaged parts
Before use, carefully check the tool and mains
cable for damage. Check for misalignment and
seizure of moving parts, breakage of parts,
damage to guards and switches and any other
conditions that may affect its operation. Ensure
that the tool will operate properly and perform
its intended function. Do not use the tool if any
part is damaged or defective. Do not use the
tool if the switch does not turn it on and off.
14
Have any damaged or defective parts replaced
by an authorised D WALT repair agent. Never
E
attempt any repairs yourself.
11 Remove the battery pack
Remove the battery pack when not in use,
before changing any parts of the tools,
accessories or attachments and before
servicing.
12 Store idle tools
When not in use, tools must be stored in a dry
place and locked up securely, out of reach of
children.
13 Maintain tools with care
Keep the tools in good condition and clean
for better and safer performance. Follow the
instructions for maintenance and changing
accessories. Keep all handles and switches dry,
clean and free from oil and grease.
14 Repairs
This tool is in accordance with the relevant
safety regulations. Have your tool repaired by
an authorised D WALT repair agent.
E
Repairs should only be carried out by qualified
persons using original spare parts; otherwise
this may result in considerable danger to the
user.
Additional safety instructions for flashlights
• Do not look directly into the beam of light.
• Do not touch the lens surface during or
immediately after use. Allow the tool to cool for
several minutes before storing or servicing it.
• Do not expose the tool to wet or damp
conditions.
• Do not cover the light with a cloth or other
flammable materials in order to avoid fire hazard.
• Do not operate the light without lens cover
assembly attached.

Package contents

The package contains:
1 Flashlight
1 Instruction manual
• Take the time to thoroughly read and understand
this manual prior to operation.