Ignitors; Pilotless Ignition; Selecting Flame Size; Care Information - Magic Chef 3442XRA User Manual

USING YOUR COOKTOP
PILOTLESS IGNITION
OFF position prior to supplying gas to To obtain a lower flame size, turn knob
the appliance, back toward the OFF position until the
desired flame size is reached. The low-
TO OPERATE SURFACE BURNER est flame setting is located adjacent to
the OFF position.
DURING A POWER FAILURE. Use HIGH to quickly bringfoods to a boil
or to begin a cooking operation. Reduce
1. When lighting surface burners, be to a lower setting to continue cooking.
sure all controls are in the OFF posi- Never leave food unattended during a
tion. Hold a lighted match to the de- cooking operation.
sired surface burner head.
2. Turn knob to LITE. The burner will
then light. !
3. Adjust the flame to the desired level. ,-_r_,_-,_-_.
SELECTING FLAME SIZE CARE INFORMATION
If a knob is turned very quicklyfrom When cleaning around the surface
HIGHto LOW setting,the flame maygo burner,use care to preventdamage to
out, particularly if burner is cold. If this the spark ignitorwhich is located at the
back-side of each burner. If a cleaning
occurs, turn the knob OFF. Wait several Use LOW to simmer or keep foods at cloth should catch the ignitor, it could
seconds, then light again, serving temperatures. Some cooking damage or break it. If the ignitor is dam-
may take place if the utensil is covered, aged or broken, the surface burner will
X"__ not light.
Ignitor
REARVIEWOF SEALEDBURNER
Flameshouldbe adjustedso itdoesnot
extend beyond the edge of cooking If a LOW settingis to be used,preheat
utensil. T hisisfor persona] safetyandto the burneron HIGH for a minutethenre-
prevent damage to cabinets above duce to the LOW setting and continue
range, the cooking operation.
-8-