Ac Input Circuit Breakers; 24 Vdc Output Connector; Dc Output Circuit Breaker - Tesla TI50A User Manual

2.8 – AC Input Circuit Breaker
The AC Input Circuit Breaker is located above the AC Input Connector. When the circuit breaker has been
tripped, the red button will pop out. In the event that the breaker trips:
1. Disconnect the ac and dc connectors. (Unplug ac line cord on military unit.)
2. Wait for a minimum of 60 seconds.
Reset breaker by pressing red button.
3.
Reconnect ac and dc connections to the unit. (Plug in ac line cord on military unit.)
4.
The unit should power up automatically. If the breaker continues to trip, return the unit to Tesla™ Industries
for repair.
2.9 – 24 Vdc Output Connector
The 24 Vdc Output Connector provides 50 amps continuous @ 28.5 Vdc (when plugged into ac power).
When the Output Connector is not in use, cover the receptacle with the Protective Cover (see Figure 2.9.1) to
protect the Output Connector from dust and foreign matter.
Open
2.10 – DC Output Circuit Breaker
The DC Output Circuit Breaker is located on the bottom section on the front panel. Both Circuit Breakers
on together provides 70 Amps max. When the circuit breaker has been
tripped, the rocker switch will flip off. If the Circuit Breakers trip, it has
exceeded the 70 amps max limit.
If the breaker has tripped:
1. Lower the amperage the unit is pulling below 70 amps.
2. If you are certain your load is below 70 amps and the Circuit
Breakers continue to trip, return the unit to Tesla™ for repair.
TI50A DC Power Supply
Figure 2.8.1 - AC Input Circuit Breaker
Figure 2.9.1 - 24 Vdc Output Connector Protective Cover
(outlined in blue)
Closed
Product Overview
2
9