PRO SMOKE PSMKOFFSET Owner's Manual page 9

STEP 10
— Turn the firebox top (9) upside down and fit the firebox base (10) to it using 6 x M6*12mm
bolts.
STEP 11
— Screw 2 x M6*12mm bolts halfway into the holes at the side of the elliptical cut out leaving a
space of 5mm.
STEP 12
— Attach firebox assembly to main cooking chamber (23) by aligning the slots on the main
cooking chamber to the two M6*12mm bolts and slide into place as shown.
— Secure using 4 x M6*12mm bolts into the main cooking chamber (23) and 2 x M6*12mm bolts
into the firebox support (14).
fig. 12
fig. 13
fig. 10
fig. 11
fig. 14
9