PRO SMOKE PSMKOFFSET Owner's Manual page 8

8
STEP 7
— On the firebox top (9) fit the firebox lid stop (6) into the slot near the opening and bolt to lid
using 1 x M6*12mm bolt & 1 x M6 flange nut.
STEP 8
— To the firebox base (10) fit the ash tray bracket (11) using 6 x M6*12mm bolts.
STEP 9
— Fit the air damper (12) to the end of the firebox base (10) using 1 x M6*12mm bolt and 2 x
M6 lock nuts. Tighten the first nut until the damper fits firmly but still turns easily. Hold the
first nut still with one spanner and tighten the second nut hard against the first nut with
another spanner.
fig. 7
fig. 8
fig. 9