PRO SMOKE PSMKOFFSET Owner's Manual page 6

6
C. ASSEMBLY INSTRUCTIONS
Choose a good, cleared assembly area and get a friend to help you put your smoker together.
Lay card board down to protect the exterior finish. Before assembling your new smoker, unpack
all parts from the box. Carefully remove all packing material and lay out all the parts for easy
access and identification. Do not discard the carton or packaging until your smoker is fully
assembled and operating to your satisfaction.
STEP 1
— Remove hinge locking screw from the left and right hand hinge of main cooking chamber lid
(27) and slide lid off the hinge pins.
STEP 2
— Fit the warming rack support (34) at the back of the inside of the main cooking chamber (23)
with 3 x M6*12mm bolts.
STEP 3
— Fit one long leg (19) and one short leg (16) to the main cooking chamber using 8 x M6*12mm
bolts and M6 flange nuts.
fig. 1
fig. 2
fig. 3