Table of Contents
Advertisement
The windscreen will be wiped again after
●
approximately five seconds once the "auto-
matic wash/wipe system" has been activa-
ted, provided the vehicle is moving (drip func-
tion). If you activate the wipers less than 3
seconds after the drip function, a new wash
sequence will begin without performing the
last wipe. For the "drip" function to work
again, you have to turn the ignition off and
then on again.
●
Do not put stickers on the windscreen in
front of the rain sensor*. This may cause sen-
sor disruption or faults.
●
Depending on the version of the model,
when you engage reverse gear and with the
headlight wiper activated, this can start a
wipe.
Rear view mirrors
Interior mirror
It is dangerous to drive if you cannot see
clearly through the rear window.
Interior mirror with automatic anti-dazzle
function*
The anti-dazzle function is activated every
time the ignition is switched on.
When the anti-dazzle function is enabled, the
interior rear vision mirror will darken auto-
matically according to the amount of light it
Lights and visibility
receives. The anti-dazzle function is cancel-
led if reverse gear is engaged.
Note
●
The automatic anti-dazzle function will only
work properly if the sun blind* for the rear
window is retracted and there are no other
objects preventing light from reaching the in-
terior rear vision mirror.
If you have to stick any type of sticker on
●
the windscreen, do not do so in front of the
sensors. Doing so could prevent the anti-daz-
zle function from working well or even from
working at all.
Folding in the exterior mirrors man-
ually
The exterior mirrors of the vehicle may be fol-
ded in. For this, press the mirror housing to-
wards the vehicle.
Note
Before washing the vehicle with an automatic
car wash, fold in the exterior mirrors to avoid
damage.
Electric exterior mirrors*
Exterior mirror controls.
Fig. 148
Read the additional information carefully
›››
page 20
The exterior mirrors can be adjusted using
the rotary knob in the driver door.
Basic setting of exterior mirrors
›››
1. Turn knob
Fig. 148
to position L (left ex-
terior mirror).
2. Turn the rotary knob to position the exteri-
or mirror so that you have a good view to
the rear of the vehicle.
3. Turn the knob to position R (right exterior
mirror).
4. Swivel the rotary knob to position the ex-
terior mirror so that you have a good view
›››
to the rear of the vehicle
»
.
147
Advertisement
Table of Contents
