Remote Controls And Their Functions - Carrier 42HQE018 Owner's Manual

42HQE009 / 012 / 018 / 022

Remote controls and their functions

TEMP
SPEED
MODE
FAN
SPEED
5
AIR
DIRECTION
6
SWING
8
CLOCK
10
13
GB - 6
AUTO COOL DRY HEAT FAN
CLOCK
TIMER ON
TIMER OFF
AUTO LOW MED HIGH
ON
TEMP.
OFF
ECONOMIC
RUNNING
OK
TIMER ON
CANCEL TIMER OFF
TIME ADJUST
5. Wind directory button
Push this button to change the swing
angle of louver. (This is not conform to
the unit without this function.)
6. Auto louver button
Push this button to swing louver. Push
the
button again to stop.
7. Economy running button
Push this button to set the economical
operation mode (some models
without).
8. Reserve button
Push this button to reserve ON timer
and
OFF timer settings.
9. ON/OFF timer button
Push TIMER ON timer button to set
7
the ON timer. Push TIMER OFF timer
button to set the OFF timer.
10. Clock button
9
Push this button to set time.
11. Cancel button
11
Push this button to cancel ON timer
and OFF timer.
12
12. Time adjust button
This button is used for setting the
current time and OFF time.
14
13. Lock button
When you push the LOCK button, all
current settings are locked in and the
remote controller does not accept any
operation except that of the LOCK
button. Use the lock mode when you
want to prevent setting from being
changed accidentally or playfully.
Push the LOCK button again when you
want to cancel the LOCK mode.
14.Reset button
When you push the RESET button, all
current settings are cancelled and get
into the condition of beginning. In the
clock, the colon in "0:00" will flash, the
mode displays "AUTO", fan speed
displays "AUTO" the temperature
displays "24".
• The remote controller above drawing
may have some differences from the
one that you purchase.