GE 30784 User Manual page 4

Getting started
Installing on a desk
1. Remove the base bracket by lifting it up from both sides of the bracket as shown in
figure 1 below.
2. Plug one end of the coiled handset cord into the jack at the bottom of the
telephone base as shown in figure 2. Plug the other end of the coiled cord into the
bottom of the handset making sure that the plug is snapped into place and flush
with the bottom of the handset. Then route the coiled cord through the tabbed slot
as shown.
3. Slide the desk/wall switch to the desk position.
Figure 2
Figure 1
Route the cord
through the
tabbed slot.
desk wall
2
Getting started
4. Replace the bracket to the telephone base.
5. Plug the smaller end of the power adapter into the power jack at the back of the
telephone base.
6. Plug one end of the telephone line into the jack at the back of the telephone base.
7. Plug the other end of the telephone line into a telephone wall jack.
8. Plug the larger end of the power adapter into an electrical outlet not controlled by
a wall switch.
Figure 3
CAUTION:
1. Use only the power adaptor that came with this unit. Using other power adaptors may damage the unit.
2. To prevent fire or electrical shock hazard, do not expose this product to rain or moisture.
desk wall
3