Registering A Handset; Deregistering A Handset - GE 30784 User Manual

Dect 6.0 bluetooth corded/cordless telephone
Table of Contents

Advertisement

Telephone operation
2. If your telephone system only has one cordless handset, the intercom call will be
diverted to the cordless handset automatically.
-OR-
If your telephone system has more than one cordless handset, press
the scroll wheel to select the desired handset, and then press the Select softkey.
The call is placed on hold while the intercom is established with the other system
device.
3. Press
,
, or
to answer the intercom on the other handset.
4. You can choose from one of the following options for this intercom call.
• Press the Cancel softkey to end the intercom and switch back to the outside call.
• Return the corded handset to the telephone base or press
base to transfer the call to the other cordless handset.
• Press the Conf softkey to connect both devices to the outside call.

Registering a handset

The telephone system can support up to a total of 7 cordless handsets. Handsets that
were included with your telephone base are pre-registered.
To add or re-register a handset using a cordless handset:
1. Press the Menu softkey on the cordless handset when the screen displays Not
Registered Press menu to register.
2. The handset screen then displays Please set your base in registration mode.
3. At the telephone base, press the Menu softkey when in idle mode.
4. Press
/
or use the scroll wheel to select Adv. Settings and then press the
Select softkey.
5. Press
/
or use the scroll wheel to select Register and then press the
Select softkey. The telephone base screen displays Searching For Handset.
6. Press the OK softkey on the handset. The screen displays Please wait...
A beep sounds on the handset when the registration is successful.
NOTE: This product is compatible with model 30780 accessory handsets only. For information on how to
purchase accessory handsets, please visit our website at www.gephones.com

Deregistering a handset

This feature is intended for base replacement procedures. Handset deregistration is
not recommended for normally functioning systems. For more information concerning
deregistration, visit us online at www.gephones.com and select support. Here you
will find FAQs to help with registration issues.
Using a cordless handset:
1. Press the Menu softkey when the handset is in idle mode.
2. Press
/
or use the scroll wheel to select Adv. Settings and then press the
Select softkey.
/
on the telephone
42
Telephone operation
3. Press
/
Select softkey.
4. Press
/
the Select softkey.
or use
5. The screen displays Deregistered and a beep sounds if the deregistration is
successful.
Using the telephone base:
1. Press the Menu softkey when the handset is in idle mode.
2. Press
/
or use the scroll wheel to select Adv. Settings and then press the
Select softkey.
3. Press
/
or use the scroll wheel to select Deregister and then press the Select
softkey.
4. Press
/
or use the scroll wheel to select the desired handset, then press the
Select softkey.
5. The screen displays Deregistered and a beep sounds when the deregistration is
successful.
or use the scroll wheel to select Deregister and then press the
or use the scroll wheel to select the desired handset, then press
43

Advertisement

Table of Contents
loading

Table of Contents