Philips AZ5140 User Manual page 19

CASSETTE RECORDER
RECORDING FROM THE RADIO
1. Set the source selector to FM or MW.
2. Tune to the desired radio station using the TUNING knob.
3. Press 9 / to open the cassette holder.
4. Insert a blank tape.
5. Press 0 to start recording.
6. For brief interruptions, press ;. To resume recording,
press ; again.
7. To stop recording, press 9 /.
SYNCHRO START CD RECORDING
1. Set the source selector to CD•VCD.
2. Insert a CD and if desired, programme track numbers.
3. Press 9 / to open the cassette holder.
4. Insert a blank cassette.
5. Press 0 to start recording.
™ Playing of the CD programme starts automatically from the
beginning of the programme.
6. For brief interruptions, press ;. To resume recording,
press ; again.
7. To stop recording press 9 /
To select and record a particular passage within a track
1. Press and hold ∞ or § on the set to select a passage.
2. Put the CD player in ; position at the selected passage.
™ Recording will start from this exact point when you press 0.
3. Press 2; to start recording.
TAPE DECK MAINTENANCE
To ensure a good recording and playback of the tape deck, clean
parts A,B and C show in the diagram below, after approx. 50 hours of
operation, or on average once a month. Use a cotton bud slightly
moistened with alcohol or a special head cleaning fluid to clean the deck.
• Open the cassette holder by pressing 9 /.
• Press 1 and clean the rubber pressure rollers C.
• Press ; and clean the magnetic heads A and also the capstans B.
• After cleaning, press 9 /.
Cleaning of the heads can also be done by playing a cleaning cassette through once.
C B A A
19