Advertisement
5
7. Wire Schematic:
White: Power
Black: Ground
Step 1: Hardwire to vehicle according
to schematic above. Attach power to
either Switch (ignition) or Constant.
Depending on how you want the
camera to operate.
Step 2: Use electrical tape to conceal
exposed wires once connected. Test
Ignition to insure proper connection.
Step 3: Conceal Charge Guard/Battery
Backup box and wires.
Install Micro SD Card by pushing in logo
side up until it clicks. (See user guide for
inserting and removing SD cards).
install security bracket with the two screws
using the tool provided. As shown above.
Advertisement
