Maintenance And Treatment - Celsius CONDOR Instructions Manual

Maintenance and Treatment

1. Verify that all the bolts and nuts are locked properly and the turning parts should be turned
freely without damaged parts.
2. Clean the equipment with soap and slightly damp cloth only. Please do not use any solvent to
clean the equipment.
Malfunction
Base is unstable.
Handlebar is shaking.
Loud noise from the
moving parts.
No resistance when
riding the upright
bike.
Malfunctions and Treatment
Reason
1. Floor is not flat or there is small
object under the front or rear
stabilizer.
2. The rear stabilizer end caps have
not been leveled when
assembling.
The bolts and saddle post knob are
loose.
The interval of the parts is improper
tighten.
1. The interval of the magnetic
resistance increases.
2. Tension controller is damaged.
3. Running belt slips.
4. The bearing set is damaged.
Treatment
1. Remove the object.
2. Adjust the rear stabilizer end caps.
Tighten the Bolts and saddle post
knob.
Open the covers to adjust.
1. Open the covers to adjust.
2. Change the tension controller.
3. Open the covers to adjust.
4. Change the bearing set.
- 8 -