Battery Usage - Nordmende LITE110B User Manual

SECTION 3
GETTING STARTED
NOTE: Ensure that the plug of the charger and the plug of the USB
cable are inserted in the right direction.
nserting them in a wrong direction may cause charging failure or
other problems.
Before the charging, ensure that the standard voltage and
frequency of the local main supply match the rated voltage and
power of the travel charger.

4 BATTERY USAGE

The performance of a battery is subject to multiple factors:
radio network configuration, signal strength, ambient
temperature, chosen functions or settings, phone fittings, and
the voice, data or other application mode you choose to use.
To guarantee the optimal performance of your battery, please
stick to the following rules:
■ Use only the battery provided by the vendor. Otherwise,
damages or even injuries could be caused during the charging.
■ Power off the mobile phone before removing the battery.
■ The charging process lasts a longer time for a new battery or
a battery not in use for long. If the battery voltage is too low
to enable the mobile phone to be powered on, charge the
battery for a longer time. In this case, the battery icon does
not flicker until a long time after the battery enters the charge
status.
■ During the charging, ensure the battery is placed in a room
temperature environment or in an environment close to room
temperature.
■ Immediately stop using the battery if the battery produces
odor, overheats, cracks, distorts or has other damage, or if the
electrolyte leaks
USER GUIDE | page 14