Table of Contents
Advertisement
Chapter 3
GETTING STARTED
1 SIM CARD AND BATTERY INSTALLATION
A SIM card carries useful information, including your mobile phone
number, PIN (Personal Identification Number), PIN2, PUK (PIN
Unlocking Key), PUK2 (PIN2 Unlocking Key), IMSI (International Mobile
Subscriber Identity), network information, contacts data, and short
messages data.
( See Fig.3 )
Note: After powering off your mobile phone, wait for a few
seconds before removing or inserting A SIM card.
Exercise caution when operating A SIM card, as friction or
bending will damage the SIM card.
Properly keep the mobile phone and its fittings such as the
SIM cards beyond children's reach.
IMPORTANT: Be very careful when inserting the battery, to
prevent copper contacts from bending.
•
Hold the End key for a while to power off the mobile
phone
•
Push the back cover above the battery and remove it.
•
Pull the left battery buckle outward and then lift the
battery away.
•
Insert the SIM card into the SIM card slot lightly with the
corner cutting of the card aligning to the notch of the
slot and the gold plate of the card facing download, till
the SIM card cannot be further pushed in.
•
With the metallic contacts of the battery facing the
metallic contacts in the battery slot, press the battery
down until it locks into place.
USER MANUAL | page 16
Advertisement
Table of Contents
