Charging The Battery - Nordmende LITE110B User Manual

To remove the T-flash card, open its latch and slightly take the
card out. And then close the latch.

3 CHARGING THE BATTERY

The lithium battery delivered with the mobile phone can be
put into use immediately after being unpacked.
Battery level indication:
■ Your mobile phone can monitor and display the battery status.
■ Normally the remaining energy of the battery is indicated
by the battery level icon at the upper right corner of the
display screen.
■ When the battery energy is insufficient, the mobile phone
prompts "Battery low". If you have set an alert tone, an
alert tone will be given off when the battery level is too low.
■ A charging animation appears when the battery is being
charged. When the charging is complete, the animation
disappears.
Using a travel adapter:
■ Install the battery into the mobile phone before charging
the battery.
■ Connect the adapter of the travel charger with the charging slot
in the mobile phone. Ensure that the adapter is fully inserted.
■ Insert the plug of the travel charger to an appropriate power
outlet.
■ During the charging, the battery level grids in the battery
icon keep flickering till the battery is fully charged.
■ It is normal that the battery becomes hot during the
charging period.
■ The battery icon does no longer flicker when the charging
process ends di carica si conclude.
USER GUIDE | page 13