Samsung BD-P1000 Service Manual page 93

TV Output Selection TV Output Selection
Feature Feature
You may choose from VIDEO, S-VIDEO, COMPONENT You may choose from VIDEO, S-VIDEO, COMPONENT
and HDMI mode for video output. and HDMI mode for video output.
Use the TV OUT SELECT button on the front panel of the Use the TV OUT SELECT button on the front panel of the
unit to select the video output while the disc is stopped. unit to select the video output while the disc is stopped.
- Video Output mode changes as follows when the TV OUT - Video Output mode changes as follows when the TV OUT
SELECT button is pressed: SELECT button is pressed:
VIDEO VIDEO order. order.
- To select HDMI output, press the TV OUT SELECT - To select HDMI output, press the TV OUT SELECT
button until the HDMI indicator lights. button until the HDMI indicator lights.
- To select COMPONENT output, press the TV OUT - To select COMPONENT output, press the TV OUT
SELECT button until the COMP indicator lights. SELECT button until the COMP indicator lights.
- To select VIDEO or S-VIDEO output, press the TV OUT - To select VIDEO or S-VIDEO output, press the TV OUT
SELECT button until the VIDEO indicator lights. SELECT button until the VIDEO indicator lights.
If HDMI mode is selected for TVs providing If HDMI mode is selected for TVs providing
■ ■
display information (EDID), the TV resolution display information (EDID), the TV resolution
NOTE NOTE
will be automatically changed to the best will be automatically changed to the best
quality supported by the TV. quality supported by the TV.
If HDMI mode is selected for TVs that do not If HDMI mode is selected for TVs that do not
■ ■
provide display information (EDID), provide display information (EDID),
resolution will be adjusted to 480p. resolution will be adjusted to 480p.
If COMP (Component) mode is selected, If COMP (Component) mode is selected,
■ ■
resolution will be adjusted to 480p. resolution will be adjusted to 480p.
If VIDEO mode is selected, resolution will be If VIDEO mode is selected, resolution will be
■ ■
adjusted to 480i. adjusted to 480i.
Only resolutions supported by the TV are Only resolutions supported by the TV are
■ ■
available. available.
Select the resolution from <Setup> Select the resolution from <Setup>
■ ■
<Display Setup>. (See page 43.) <Display Setup>. (See page 43.)
18 - English 18 - English
Samsung Electronics
VIDEO ➞ COMP ➞ HDMI ➞ VIDEO ➞ COMP ➞ HDMI ➞
➞ ➞
Choosing a Connection Choosing a Connection
The following shows examples of connections commonly The following shows examples of connections commonly
used to connect the Blu-ray disc player with a TV and other used to connect the Blu-ray disc player with a TV and other
components. components.
Connecting to a TV(Video) Connecting to a TV(Video)
1. Using video/audio cables, connect the VIDEO 1. Using video/audio cables, connect the VIDEO
(yellow)/AUDIO (red and white) OUT terminals on the rear (yellow)/AUDIO (red and white) OUT terminals on the rear
of the Blu-ray disc player to the VIDEO (yellow) /AUDIO of the Blu-ray disc player to the VIDEO (yellow) /AUDIO
(red and white) IN terminals of your TV. (red and white) IN terminals of your TV.
2. Turn on the Blu-ray disc player and TV. 2. Turn on the Blu-ray disc player and TV.
3. Press the TV OUT SELECT button on the front panel 3. Press the TV OUT SELECT button on the front panel
of the unit until the VIDEO indicator lights. Make sure of the unit until the VIDEO indicator lights. Make sure
the unit is in Stop mode. the unit is in Stop mode.
4. Press the input selector on your TV remote control 4. Press the input selector on your TV remote control
until the Video signal from the Blu-ray disc player until the Video signal from the Blu-ray disc player
appears on the TV screen. appears on the TV screen.
• If you have set the remote control to properly operate • If you have set the remote control to properly operate
with your TV (pages 15~16), press the INPUT SEL. with your TV (pages 15~16), press the INPUT SEL.
button on the remote control and select VIDEO as the button on the remote control and select VIDEO as the
external source of the TV. external source of the TV.
Noise may be generated if the audio cable Noise may be generated if the audio cable
■ ■
placed too close to the power cable. placed too close to the power cable.
NOTE NOTE
If you want to connect to an Amplifier, If you want to connect to an Amplifier,
■ ■
please refer to the Amplifier connection please refer to the Amplifier connection
page. (See pages 21 to 22) page. (See pages 21 to 22)
The number and position of terminals may The number and position of terminals may
■ ■
vary depending on your TV set. Please refer vary depending on your TV set. Please refer
to the user's manual of your TV. to the user's manual of your TV.
If there is one audio input terminal on the TV, If there is one audio input terminal on the TV,
■ ■
connect it to the [AUDIO OUT][left] (white) connect it to the [AUDIO OUT][left] (white)
terminal of the Blu-ray disc player. terminal of the Blu-ray disc player.
If you set the TV Out Select to HDMI, the If you set the TV Out Select to HDMI, the
■ ■
Video/S-Video and Component Out Video/S-Video and Component Out
terminals will not output any signal. terminals will not output any signal.
Operating Instructions
12-7