Operating Instructions
4
...†
Press the
option from the options described below, then press
the ENTER or √ button.
5
Press the
...†
then press the ENTER button.
Press the RETURN or œ button to return
■
to the previous menu.
NOTE
Press the MENU button to exit the menu.
Digital Output
• PCM : Select this when your equipment does not
decode Dolby Digital.
• Bitstream : Outputs Dolby Digital or MPEG-2 or DTS
audio as bitstream. Select this when your
AV receiver or AV amplifier has a Dolby
Digital or MPEG-2 or DTS Decoder.
LPCM sound track is always outputted as PCM.
■
Be sure to select the correct Digital Output or
■
NOTE
you will hear no sound or a loud noise.
When playing a Dolby Digital movie make sure
■
the Digital Output is set to Bitstream.
If you have the unit connected via the 5.1
■
channel analog outputs and play a DVD Dolby
Digital disc, sound will only be heard from the
Front Left and Right speakers.
If you have the unit connected via any analog
■
output and play a DTS DVD disc, no sound
will be heard. To hear sound, the digital output
must be connected and set to Bitstream.
PCM Down Sampling
• On : Select this when the Amplifier connected to the
player is not 96KHz compatible.
In this case, the 96KHz signals will be down
converted to 48KHz
• Off : Select this when the Amplifier connected to the
player is 96KHz compatible. In this case, all
signals will be output without any changes.
Even when PCM Down Sampling
■
some discs will only output downsampled
NOTE
audio though the digital outputs.
HDMI
• If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS, MPEG), you
should set Digital Audio to PCM.
• If your TV is not compatible with LPCM sampling rates
over 48kHz, you should set PCM Down Sampling to On.
12-30
buttons to select the desired audio
buttons to select the desired item,
is set to
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
• Off : You can enjoy the movie with the standard
Dynamic Range.
• On : When Movie soundtracks are played at
low volume or from smaller speakers, the
system can apply appropriate
compression to make low-level content
more intelligible and prevent dramatic
passages from getting too loud.
Setting up the Speaker
Options
1
With the unit in Stop mode, press the MENU
button.
2
Press the
...†
the ENTER or √ button.
BD Player
BD
MOVE
3
...†
Press the
press the ENTER or √ button.
BD Player
BD
MOVE
Off,
4
Press the
...†
then press the ENTER or √ button.
BD Player
BD
L
Small
LS
Small
A
Test Tone
MOVE
buttons to select Setup, then press
Setup
Language Setup
√
√
Title
Audio Setup
√
Display Setup
Music
√
Parental Setup
√
Photo
Setup
A
Memory Card
SELECT
RETURN
EXIT
buttons to select Audio Setup, then
Audio Setup
Digital Output
: PCM
Title
√
√
PCM Down Sampling : On
√
Music
Dynamic Compression : On
√
Speaker Setup
√
Photo
Setup
A
Memory Card
SELECT
RETURN
EXIT
buttons to select Speaker Setup,
Speaker Setup
R
C
Small
Small
LFE
RS
Small
SELECT
RETURN
EXIT
English - 41
Samsung Electronics