Setting The Remote Control; Preparing The Remote Control - Samsung BD-P1000 Service Manual

Operating Instructions
Unpacking
Accessories
Check for the supplied accessories below.
Component Cable
(MD39-00107A)
Batteries for Remote
Control (AAA Size)
(4301-001035)
Instruction Manual
(AK68-01091A)

Preparing the Remote Control

Install Batteries in the Remote Control
• Open the battery cover on the back of the remote control.
•
Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
• Close
the battery cover.
If the remote does not operate properly:
•
Check the polarity + - of the batteries (Dry-Cell)
•
Check if the batteries are drained.
•
Check if remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
12-4
Composite (Video),
Audio L/R Cable
(MF39-00274A)
POWER TV
OPEN/CLOSE POWER
SCENE SEARCH INPUT SEL.
STOP PLAY
TV MUTE
VOL CH
MENU RETURN
ENTER
POPUP MENU
DISC MENU INFO CANCEL TITLE MENU
AUDIO SUBTITLE REPEAT REPEAT
MARKER ZOOM
00057A
Remote Control
Quick Guide

Setting the Remote Control

You can control certain functions of another
manufacturer's TV with this remote control.
Control function buttons include: TV POWER,
CH , VOL + -, TV MUTE, INPUT SEL. button.
To determine whether your television is
compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Press and hold the TV POWER button and enter
the two-figure code corresponding to the brand of
your television, by pressing the appropriate
number buttons.
Result: If your television is compatible with the remote
control, it will switch off.
It is now programmed to operate with the
remote control.
If several codes are indicated for your
■
television brand, try each one in turn until
NOTE
you find one that works.
If you replace the remote control's batteries,
■
you must set the brand code again.
Then you can control the television using the following
buttons after pressing the TV button.
Button Function
TV POWER Used to switch the television on and off.
INPUT SEL. Used to select an external source.
VOL (+ -) Used to adjust the volume of the television.
CH ( ) Used to select the desired channel.
TV MUTE Used to toggle the sound on and off.
The functions listed above will not necessarily
■
work on all televisions. If you encounter
NOTE
problems, operate the television directly.
English - 15
Samsung Electronics