Maintenance; Notes For Cleaning; Replacing The Pure N Fresh Filter (Optional) - LG GS-B680PL Owner's Manual

4 Keep the phone on the speaker hole in the
upper right corner.
• Position the phone so that its microphone is
aligned with the speaker hole.
• The Smart Diagnosis™ sound is generated
after around three seconds.
• Do not take the phone off the speaker hole
while the data is transmitted.
• Hold the phone to the upper right speaker
hole and wait while the data is transmitted.
• The data transfer sound may be harsh to
the ear while the Smart Diagnosis™ data is
being transmitted, but do not take the phone
off the speaker hole for accurate diagnosis
until the data transfer sound has stopped.
5
After the data transfer is complete, the service
agent will explain the result of the Smart
Diagnosis™.
• When the data transfer is complete, the
transfer completion message is displayed
and the control panel is automatically turned
off and then on again after a few seconds.
After the customer information centre
explains the diagnosis result.
NOTE
• The Smart Diagnosis™ function depends on the
local call quality.
• The communication performance will improve
and you can transmit a better signal if you use a
land line home phone.
• If the Smart Diagnosis™ data transfer is poor
due to poor call quality, you may not receive the
best Smart Diagnosis™ service.
28

MAINTENANCE

Notes for Cleaning

• When removing a shelf or drawer from inside the
appliance, remove all stored foods.
– Otherwise, injury may occur due to the weight
of stored foods.
• If cleaning the outside air vents of the appliance
by means of vacuuming, then the power cord
should be unplugged from the outlet to avoid any
static discharge that can damage the electronics
or cause an electric shock.
• Detach the shelves and drawers and clean them
with water, and then dry them sufficiently, before
replacing them.
• Regularly wipe the door gasket with a wet soft
towel.
• Door basket spills and stains should be cleaned
as they can compromise storage ability of the
basket and could even be damaged.
• After cleaning, check if the power cable is
damaged, warm or improperly plugged.
• Keep the air vents on the exterior of the
appliance clean.
– Blocked air vents can cause fire or appliance
damage.
• Waxing external painted metal surfaces helps
provide rust protection. Do not wax plastic parts.
Wax painted metal surfaces at least twice a year
using appliance wax (or auto paste wax). Apply
wax with a clean, soft cloth.
• For the appliance exterior, use a clean sponge
or soft cloth and a mild detergent in warm water.
Do not use abrasive or harsh cleaners. Dry
thoroughly with a soft cloth.
• Never clean the shelves or containers in the
dishwasher.
– The parts may become deformed due to the
heat.
• If the appliacne is equipped with an LED lamp,
do not remove lamp cover and LED lamp in any
attempt to repair or service it. Please, contact an
LG Electronics customer information centre.
Replacing the Pure N Fresh
Filter (Optional)
To maintain the performance of the Pure N Fresh
filter, if a message indicating the filter replacement
is displayed, replace the filter as soon as possible.
1 If Replace icon lights on the control panel,
replace the Pure N Fresh filter.
2 Hold and remove the Pure N Fresh filter
cover by rotating it counterclockwise.
3 Remove the filter inside the Pure N Fresh
filter cover and replace it with a new filter.
4 After replacing the filter, insert the Pure N
Fresh filter cover by rotating it clockwise.
29