ZyXEL Communications P-2612HNU-Fx Series Quick Start Manual page 5

1. Do one of the following for your Internet connection:
a. DSL: Use a telephone wire to connect this port to a telephone jack
(or the DSL or MODEM jack on a splitter, if you have one).
b. WAN: If you have a DSL router or modem already in your network
or you want to use a cable modem, push the DSL/WAN switch to
the WAN side and use an Ethernet cable to connect this port to an
Ethernet jack with Internet access.
2. ETHERNET: Use an Ethernet cable to connect a computer to one of
these ports for initial configuration and/or Internet access.
3. USB 2.0: Connect a USB (version 2.0 or lower) memory stick or a
USB hard drive for file sharing. The P-2612HNU-Fx automatically
detects the USB device. Alternatively, use a USB cable (not
provided) to connect a USB (version 2.0 or lower) printer to this
port.
4. PHONE: Use a telephone cable (and any telephone adaptor provided
with your P-2612HNU-Fx) to connect a telephone to the PHONE 1 or
PHONE 2 port. If you only have one telephone, you should use port 1.
5. Use the power adaptor provided with your P-2612HNU-Fx to connect
an appropriate power source to this socket.
6. Push the power button to the on position.
Look at the LEDs (lights) on the top panel of the P-2612HNU-Fx.
5