Front Panel; Headphone Connection; Input Selector - Box-Design Pro-Ject Pre Box DS2 Digital Instructions For Use Manual

Hide thumbs Also See for Pro-Ject Pre Box DS2 Digital:

Table of Contents

Front panel

Connect the headphones to the socket on the front panel (Jack 6,3mm). The rear outputs are not

disconnected when headphones are in use.

Volume

Adjust the volume to the desired level, using the large knob in the middle of the front panel.

◄►

After the unit is powered on, operating the buttons marked with

select the inputs. The selected input

will be shown by the corresponding LED.

Subsonic

The button activates or deactivates subsonic filter. Blue LED is on when subsonic filter is active.

MM MC

The button selects between MM and MC cartridge.

Table of Contents

Do you have a question about the Pro-Ject Pre Box DS2 Digital and is the answer not in the manual?