Safety Instructions; Analogue Out - Box-Design Pro-Ject Pre Box DS2 Digital Instructions For Use Manual

Dear music lover,
thank you for purchasing this Pro-Ject Audio Systems preamplifier.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse
Important notice

Safety instructions

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply is easily
accessible at all times. Never handle the device or the power supply while your hands are wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid,
such as a flower vase on or near the device. Never spill any liquid on the device or the power supply.
Never place any naked flame sources, such as lighted candles on or near the device. The product shall not
be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Connectors
Make all connections whilst the preamplifier is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red,
the left channel black or white.
Never use any other power supply than the one supplied with the unit except of Pro-Ject Power Boxes
which can replace original power supplies.

Analogue out

The unit offers following analogue RCA output sockets:
Fix Out - fixed output level
Var Out - variable output level controlled by the Volume knob on the front panel. Gain of the output can be
increased by 6dB using the DIP switch Var Gain
Sub Out – subwoofer connection
Headphone - socket on front panel
2
© Pro-Ject Audio Systems · Pro-Ject Pre Box DS2 digital · Revision 2017.03.31