Table of Contents
Advertisement
SDA680xN SD-SDI Equalizing
Chapter 1 Introduction
Overview
In this manual, the different types of models for SDA680xN are introduced as follows:
SDA6801N: supports 1 channels of SDI inputs, and the input corresponds to 8 channels of SDI outputs
SDA6802N: supports 2 channels of SDI inputs, and each input corresponds to 4 channels of SDI outputs
All these modules can be installed in 6800N series frame.
General Description
The SDA680xN modules provide a low-cost solution of digital video signal distribution without the
need of restoring the clock. It can amplify and distribute one or two SDI signal, and compensate 300m
cable loss during transmission.
Features
The SDA680xN offers the following features:
one or two channel SDI input
up to 8 channel SDI output
low-cost scheme
equalize up to 300m of cable loss, and can regulate equalizing distance continuously
support hot-plugging
FCC Caution
:
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
SDA680xN SD-SDI Equalizing Distribution Amplifier
Distribution Amplifier
- 1 -
Advertisement
Table of Contents
