Chapter 1 Introduction; Overview; Features - OSEE VCA6801N User Manual

VCA680xN Analog Video Equalizing and
Clamping Distribution Amplifier

Chapter 1 Introduction

Overview

In this manual, the different types of models for VCA680xN are introduced as follows:
VCA6801N single input distribution amplifier: supports 1 channel of analog video input, and the input
corresponds to 8 channels of analog video outputs
VCA6802N dual-input distribution amplifier: supports 2 channels of analog video inputs, and each input
corresponds to 4 channels of analog video outputs
All these modules can be installed in 6800N series frame.

Features

The VCA680xN offers the following features:

One or two unbalanced input, eight channels unbalanced output

Support clamping of analog video signal

AD/DC coupling

±3dB gain range adjustment

One channel input, eight outputs (VCA6801N)

Dual channel, channel 1 for four outputs and channel 2 for four outputs (VCA6802N)

Can be adjusted at the range of 100 meters (Belden 8281)

Hot-swappable modules

525/625 input signal detection

Support SNMP control
FCC Caution
:
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
VCA680xN Analog Video Equalizing and Clamping Distribution Amplifier - 1 -