Chapter 3 Operation and Control ................7 Chapter 4 Specifications ..................8 Digital Video Input ..........................8 Digital Video Output .......................... 8 Warranty for osee product ..................9 What the warranty covers: ......................... 9 What the warranty does not cover: ..................... 9...
In this manual, the different types of models for SDA680xN are introduced as follows: SDA6801N: supports 1 channels of SDI inputs, and the input corresponds to 8 channels of SDI outputs SDA6802N: supports 2 channels of SDI inputs, and each input corresponds to 4 channels of SDI outputs All these modules can be installed in 6800N series frame.
Consult the dealer or an experienced radio/TV technician for help. Module Descriptions The Front Part of Module Figure 1-1 shows the boards of SDA6801N (up) / SDA6802N (down) Fig. 1-1 the boards of SDA6801N (up) / SDA6802N (down) Back Connector...
Signal Flow Fig. 1-3 Signal Flow of SDA6801N (up)/ SDA6802N (down) Chapter 2 Installation Overview The power consumption for module and the maximum power ratings that frame can sustain have to be confirmed before installing the module. In this chapter, the following topics on installation process for SDA680xN are discussed below: ...
Check the Packing List Tab. 2-2 Packed Components Model Name Description SDA6801N SDA6801N module (1pc); BNC (1pc), and other accessories SDA6802N SDA6802N module (1pc); BNC (1pc), and other accessories Installing the Module Static electricity may cause sensitive semiconductor out of order. Avoid installing Caution:...
Step2 Step3 Step 4 Step5 Fig. 2-1 Installation of 2U Frame of 6800N Series Locate the position for back connector and insert the back connector Fasten the screw to fix the back connector. Locate the slot for module. ...
First make sure the frame stands firmly, and then pull the module gently along the slot till out of frame. Install the front panel. Chapter 3 Operation and Control Tab. 3-1 LED Status Item Description INERR (red) On: error or no signal POWER (green) On: power is on SDA680xN SD-SDI Equalizing Distribution Amplifier...
Chapter 4 Specifications Digital Video Input Tab. 4-1 Digital Video Input Specifications Content Parameter SMPTE 259M-C;270 Mbps, Standard 525/625 digital component Quantizing 10-bit Connector BNC (IEC169-8) Impedance 75Ω Return Loss 18dB to 270MHz 230m(754.59 feet) Cable Equalization Belden 8281 cable Digital Video Output Tab.
This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, osee reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer.