Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for OSEE SRA6802N
Summary of Contents for OSEE SRA6802N
-
Page 1: User Manual
SRA6802N SD-SDI Dual Distribution Amplifier USER MANUAL... - Page 2 Product Information Model: SRA6802N SD-SDI Dual Distribution Amplifier Version: V010001 Release Date: March 12th, 2015 Company OSEE TECHNOLOGY CO., LTD. Contact Information Address: No.22 Building, No.68 zone, Beiqing Road, Haidian District, Beijing, China 100094 Post Code: Tel: (+86) 010-62434168 Fax: (+86) 010-62434169 http://www.osee-dig.com/...
-
Page 3: Table Of Contents
Setting Jumper............................ 6 LED Indicator ............................ 6 Chapter 4 Specifications ..................8 SDI Video Input ..........................8 SDI Video Output ..........................8 Warranty for osee product ..................9 What the warranty covers: ......................... 9 What the warranty does not cover: ..................... 9... -
Page 4: Chapter 1 Introduction
300m of Belden 8281. The SRA6802N can automatically switch between 525 and 625 line standards. The SRA6802N supports 2 channels of SDI inputs, and each input corresponds to 4 channels of SDI outputs. The module can be installed in 6800 series frame. -
Page 5: Module Descriptions
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Module Descriptions The Front Part of Module Figure 1-1 shows the part of SRA6802N board Fig. 1-1 the Part of SRA6802N Board Back Connector SRA6802N Fig.1-2 Back Connector of SRA6802N... -
Page 6: Signal Flow
The power consumption for module and the maximum power ratings that frame can sustain have to be confirmed before installing the module. In this chapter, the following topics on installation process for SRA6802N are discussed below: Unpacking the module ... -
Page 7: Unpacking The Module
Tab. 2-2 Packed Components Model Name Description SRA6802N SRA6802N module (1pc); back connector (1pc), and other accessories Installing the Module Static electricity may cause sensitive semiconductor out of order. Avoid Caution： installing or removing the module in the electrostatic-induced environment. -
Page 8: Making The Connections
Install the front panel. Making the Connections Please connect signals based on Fig. 1-2. Removing the Module Follow the following steps to remove SRA6802N module: Open the front part of frame. Open the swivel handle to the full. SRA6802N SD-SDI Dual Distribution Amplifier... -
Page 9: Chapter 3 Operation And Control
OFF two channel mode is set compulsorily LED Indicator If setting JP2 at AUTO, input signal is auto-detected. Set signal format by choose jumpers（540M,360M,270M,177M,143M）. Note: please set only one option of the jumpers. SRA6802N SD-SDI Dual Distribution Amplifier - 6 -... - Page 10 On: set signal at 177M, the equalization distance is 177m 143M（green） On: set signal at 143M, the equalization distance is 143m RCLK（green） On: the format which is set is compatible with the input signal INERR（red） On: no signal input SRA6802N SD-SDI Dual Distribution Amplifier - 7 -...
-
Page 11: Chapter 4 Specifications
800 mV ± 10% DC Offset 0 V ± 0.5 V 400 to1500ps（20% to 80% of Rise/Fall Time amplitude） Overshoot <10% Jitter <0.2 UI（740ps）Peak Note: Specifications are subject to change without notice SRA6802N SD-SDI Dual Distribution Amplifier - 8 -... -
Page 12: Warranty For Osee Product
This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, osee reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer.