Making The Connections; Removing The Module - OSEE SRA6802N User Manual

Step2
Step3
Step 4
Step5
 Locate the position for back connector and insert the back connector
 Fasten the screw to fix the back connector.
 Locate the slot for module.
 Get the module installed in the slot, push the module slightly along the slot, press module again to
confirm that the module is installed firmly and then close swivel handle.
 Install the front panel.

Making the Connections

Please connect signals based on Fig. 1-2.

Removing the Module

Follow the following steps to remove SRA6802N module:
1. Open the front part of frame.
2. Open the swivel handle to the full.
SRA6802N SD-SDI Dual Distribution Amplifier
Fig. 2-1 Installation of 2U Frame of 6800N Series
- 5 -