Table of Contents
Advertisement
SDI In -> FSY & SRC
This sub menu adjusts frame synchronisation for the video, and sample rate conversion for the 16
de-embedded audio channels.
Use frame sync to align incoming video signals to the reference.
Use sample rate conversion if the audio sample rate is different from, or not locked to, the
pro8's audio reference signal, see
You should disable SRC for any audio channels carrying Dolby E signals.
1.
Select the video and/or audio channels you wish to adjust - you can select audio channels in
their groups (A to D), but not as individual channels.
2.
Then click on Enable, or Disable, to adjust the frame sync or SRC on/off state for the
selected channels:
The FSY and SRC indicators turn green (illuminated) when frame sync or sample rate conversion
are enabled.
In our example, frame sync for the video channel and SRC for audio channels 1 to 12 are enabled;
SRC is disabled on channels 13 to 16; channels 13 to 16 are selected (light blue select buttons).
70
Operation (Web Browser Control)
Timing -> Reference
V1.0/2
Settings.
V_pro8 Manual
SDI In
Hide quick links:
Advertisement
Table of Contents
