Operation (Web Browser Control)
Delay
Output Delay Operation
Output delay is controlled in a similar manner, but is applied at the output from the signal routing
matrix, and therefore affects only the selected destination.
You can select any SDI output from the
from
MADI Out.
As before, select the channels you wish to delay, and then adjust the parameters.
If the output channel is routed from an input channel with delay, then you will see both the input and
output delay values:
The maximum delay per channel (input + output) cannot exceed 8 frames for video
channels or 320ms for audio channels.
V_pro8 Manual
SDI Out
main menu, or any set of MADI output channels
V1.0/2
57