Card Funnel - Isgus PERFECT 2020 Product Manual

Card Funnel

The pointer field in front of the card funnel is designed for changeable funnel shields.
The funnel shield can be inserted and can be compared with a table: it shows all
column headlines. The column headlines correspond with the clocking columns on
the time card.
In clocking operation, the column pointer marks the current clocking column in which
the IN - and OUT-times are printed when inserting the card. Structure and form of
representation of the funnel shield, therefore, should correspond to the time card.
The selection of the funnel shield depends on the time card used for your time
organisation.
The recorder is delivered with funnel shields for all standard card formats which are
available in the unit.
If you take a standard card format, you can select the corresponding funnel shield
out of the two plastic templates. Separate the corresponding shield with a cutting
knife. For a clean cutting edge, we recommend to use a guide strip. The cutting lines
are marked on the plastic bows.
In the upper left edge of the funnel shield, language and field separation, number of
columns x column width, are printed. So you can find the desired funnel shield
easier.
Example of a funnel shield:
6 x 12
English
Morning
IN
If no funnel shield is available for the desired time card you can define/create your
own funnel shield.
Recommendation
If you need another funnel shield than delivered, we recommend
to cut the part with the column headlines from your time card and
to use it as a funnel shield.
Dimensions of the funnel shield:
23 x 135 mm (HxW), 0,4 mm thick
Afternoon
OUT IN OUT OUT
Chapter 4
Extra
IN
Marks
for
cutting lines
Getting Started 4-5