Chapter 5: Web UI
5. Web UI
Use the Web interface to change settings and control the switcher. The IP address of
the switcher is 192.168.10.1 by default.
5.1 Access the Web Interface
Step 1. To use the Web interface, connect a computer to the LAN port of the switcher
using a straight-through UTP cable.
Step 2. Set a static IP address for the computer.
Go to Control Panel —> Network and Internet —> Network Connections —> Local
Area Connections, right click on it, choose Properties.
Figure 5-1. Web interface screen.
Double-click Internet Protocol Version 4 (TCP/IPv4).
Page 26
877-877-2269 | BlackBox.com