Table of Contents
Advertisement
Chapter 3: Pin Assignments and Wiring
3.7 RS-232
The RS-232 control port requires a standard straight-through serial cable for operation.
The settings for the the RS-232 port are:
- Baud Rate: 57600
- Data Bits: 8
- Parity: None
- Stop Bits: 1
Only Pin 2, Pin 3, and Pin 5 are used on the RS-232 serial interface.
Figure 3-9. RS-232 DB9 female and male connectors and pinning.
Page 23
877-877-2269 | BlackBox.com
Advertisement
Table of Contents
