Operation - Rancilio KRYO 65 OD User Manual

KRYO 65 OD
Coffee grinder on demand
1. DESCRIPTION
KRYO 65 OD
Automatic on demand coffee grinder
Legend (Fig. 1b)
1. Hopper lid
2. Bean hopper
3. Adjustment knob
4. Hopper locking slide
5. Protection lid
6. Filter holder button
7. Coffee outlet
8. Filter holder fork
9. Main switch
10. Grounds tray
11. Display
12. Single dose button
13. Double dose button
14. Customized dose button

2. OPERATION

Press the main switch (Fig. 1-9). The grinding will take place in
two modes.
The modes and how to activate are configured in the software
and can be changed by the user if needed.
Do not regrind coffee which has already been ground.
2.1. Automatic mode
In the "Automatic" mode the grinder continues to grind until the
pre-programmed dose has been dispensed. If grinding is stopped
during dispensing the dose has been cancelled.
Activation by filter holder:
- Select the dose of coffee requested - single, double or
customized dose (Fig. 1b-12 to 14). The LED of the selected
dose button will be illuminated. The customized dose button
has no LED. The selected dose will be shown in the display.
- Place the filter holder in the filter holder fork (Fig. 1-8) by
pressing the filter holder button (Fig. 1b-6) once.
- The grinder runs the predefined time and stops automatically.
- To cancel before, press the selected button again on the
keypad. The grinding cannot be continued.
- Level out the coffee contained in the filter and tamp the coffee
with the tamper;
- Check that there are no coffee grounds on the rim of the
filter holder.
- Alternatively and if selected in the menu the dose can be
selected with the filter holder.
- Place the filter holder in the filter holder fork (Fig. 1-8) by
pushing the filter holder button (Fig. 1b-6) once for a single
dose and twice for a double dose. The selected dose will be
shown in the display and the LED on the button of the
selected dose will be illuminated. In this mode no customized
dose is available.
- The grinder runs the predefined time and stops automatically.
- To cancel before, press any button on the keypad. The grinding
cannot be continued.
- Level out the coffee contained in the filter and tamp the coffee
with the tamper;
- Check that there are no coffee grounds on the rim of the
filter holder.
10
Activation by keypad:
- Place the filter holder in the filter holder fork (Fig. 1-8).
- Select the dose of coffee requested - single, double or
customized dose (Fig. 1b-12 to 14). The LED of the selected
dose glows. The customized dose button has no LED.
The selected dose will also be shown in the display.
- The grinder runs the predefined time and stops automatically.
- To cancel before, press the selected button again on the
keypad. The grinding cannot be continued.
- Level out the coffee contained in the filter and tamp the coffee
with the tamper;
- Check that there are no coffee grounds on the rim of the
filter holder.
2.2. On Demand mode
In the "On demand" mode the grinding may be paused during
dispensing and restarted.
Activation by filter holder:
- Select the dose of coffee requested - single, double or custom-
ized dose (Fig. 1b-12 to 14). The LED of the selected dose button
will be illuminated. The customized dose button has no LED.
The selected dose will also be shown in the display
- Place the filter holder in the filter holder fork (Fig. 1-8) and
press it to the filter holder button (Fig. 1b-6).
- The grinder runs the predefined time and stops automatically.
- To pause the grinding before its finished dispensing, release
the filter holder button, reactivate the dispensing by pressing
and holding the filter holder button.
- To cancel before its finished dispensing, release the filter
holder button, than press any button on the keypad.
- Level out the coffee contained in the filter and tamp the
coffee with the tamper;
- Check that there are no coffee grounds on the rim of the
filter holder.
Activation by keypad:
- Place the filter holder in the filter holder fork (Fig. 1-8).
- Select the dose of coffee requested - single, double or
customized dose (Fig. 1b-12 to 14). The LED of the selected
dose glows. The customized dose button has no LED.
The selected dose will also be shown in the display
- The grinder runs the predefined time and stops automatically.
- To interrupt before its finished grinding, press the same
button of the keypad. The LED blinks now. The grinding can
be continued by pressing the same button again.
The grinding will be stopped with any other button and
cannot be continued.
- Level out the coffee contained in the filter and tamp the
coffee with the tamper;
- Check that there are no coffee grounds on the rim of the
filter holder.
3. MAINTENANCE
Maintenance operations should be carried out with the machine
turned off and cold, and with the plug removed from the power
source.
Do not use metallic or abrasive tools, such as steel wool, metal
brushes, needles, etc., or detergents (alcohol etc.), but simply a
damp cloth or sponge.
3.1. Daily
- Clean the housing and the grounds tray.
- Clean the filter holder fork area.
- Clean the coffee outlet with a brush.