Kenmore 66121615 Owner's Manual page 5

Air Conditioner Features
(continued)
TO CHANGE
TEMPERATURE SETTING:
TO ADJUST FAN SPEEDS:
TO USE AUTO COOL FEATURE:
Remote
Sensing
DO THIS:
PRESS TO RAISE
PRESS TO LOWER
Remote
Sensing
DO THIS:
PRESS TO SELECT:
Lo, Med or Hi
Remote
Sensing
DO THIS:
PRESS TO SELECT:
AUTO COOL
YOU WILL SEE:
Note: Tap or hold either up( ) or down( ) button until the desired
temperature is seen on the display. This temperature will be
automatically maintained anywhere between 60F (16C) and 90F
(32C). If you want the display to read the actual room temperature.
See "To Operate on Fan Only" section on Page 6.
YOU WILL SEE:
The chosen fan speed LED will light up.
YOU WILL SEE:
Note: Fan speed starts at high and adjusts to a slower speed as
the room temperature dictates. For example, if the room doesn't
get too warm it will stay at the slowest speed. If the room
temperature rises quickly, such as a door being opened, it will
automatically go to the highest speed. The fan speeds will readjust
back to the slowest speed as the room returns to the original set
temperature. Press the Fan Speed button to adjust the fan speed
manually.
5
Remote
Sensing
Remote
Sensing
LIGHT On
Remote
Sensing