To Turn Unit Off - Kenmore 66121615 Owner's Manual

FAULT CODES
If the display reads "AS", a sensor
has failed. Contact your Authorized
Kenmore Service Center

TO TURN UNIT OFF:

Air Conditioner Features
(continued)
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar
with:
The "Cool" circuit has an automatic 3 minute delayed start if the unit is turned off and on quickly. This prevents overheating
of the compressor and possible circuit breaker tripping. The fan will continue to run during this time.
The control will maintain the set temperature within 2 F, between 60 F and 90 F degrees.
The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the
other and back, press and hold the "TEMP/TIMER" Up ( ) and Down ( ) buttons together for 3 seconds.
EXHAUST CONTROL
This Exhaust Control allows the air conditioner to either recirculate inside air (CLOSED) or exhaust air to the outside (OPEN).
The CLOSED position is used when maximum cooling is desired. It may also be used for air recirculation without cooling
when the air conditioner is set in any FAN position.
The OPEN position removes stale air from the room and exhausts it to the outside. Fresh air is drawn in through normal
passages in the home.
4-WAY LOUVERS
Remote
Sensing
DO THIS:
PRESS ON/OFF
BUTTON
ADDITIONAL THINGS YOU SHOULD KNOW
Remote
Sensing
The 4-Way air directional louvers allow you to direct air flow
up or down, left or right throughout the room as needed.
8
If the display reads "ES", a sensor
has failed. Contact your Authorized
Kenmore Service Center
YOU WILL SEE:
Remote
Sensing
Remote
Sensing