Philips 200WP7EB/00 Service Manual page 62

62 200WP7 LCD
3.0 Electrical characteristics
3.1 Interface signals
The input signals can be applied in three different modes:
1). D-Sub Analog
Video: 0.7 Vp-p, input impedance, 75 ohms @DC
Sync. : Separate sync TTL level, input impedance 2.2k ohm terminate
2). Intel DVI Digital
Input signal: Single channel TMDS signal
3.2 Interface
3.2.1 D-Sub Cable
Length
Connector type
USB hub
Input signal: Upstream input (V
Output signal: Downstream output (V
2006-02-16
Jason Wang
GENERAL PRODUCT SPECIFICATION
Input signal: Video, Hsync. , Vsync
Hsync Positive/Negative
Vsync Positive/Negative
Composite sync TTL level, input impedance 5k ohm terminate
Sync on green video 0.3 Vp-p Negative (Video 0.7 Vp-p Positive)
: 1.8 M +100/- 0 mm (fixed)
: D-Sub male with DDC2B pin assignments.
Blue connector thumb-operated jackscrews
, D+, D-, GND) via USB-B receptacle.
BUS
20.1" TFT UXGA LCD Monitor
(HUDSON 7-200WP7)
TYPE : 200WP7ES/00
BRAND : PHILIPS
2006-02-16
(Positive/Negative)
, D+, D-, GND) through USB-A receptacle
BUS
8639 000 16908
25 590
6