Table of Contents
Advertisement
Items
3 input sources are available in the items when AV box is connected to the
Source
projector: PC, Video, S-video
Volume
To set the volume level of speaker built in the AV box.
Treble
To set the treble level of speaker built in the AV box.
Bass
To set the bass level of speaker built in the AV box.
To turn on/off the mute
Mute
*The priority of input signal detection: a. PC b. S-Video c. Video
*When selecting input sources, the projector will detect the selected input simultaneously, and the OSD menu will still
exist on the screen.
Other Correspondent Remote Functions and Messages
Downloaded From projector-manual.com BenQ Manuals
function.
OSD
Source
Freeze
Mute
Volume
Magnify
Description
FUNCTION
The selected source will be displayed at the bottom right
of the screen for 3 seconds after selecting the source. (PC,
VIDEO, S-VIDEO).
The image will be frozen when the "Freeze" button is
pressed. A "" mark appears at the lower right of the
screen for 3 seconds during the freeze function.
Furthermore, a " " mark appears at the lower right of
the screen for 3 seconds when freeze is released. "Freeze"
is released when the source button or the "Freeze" button
is pressed again.
Press the "Mute" button and the sound will be muted.
There will be an OSD message as shown below:
Press Mute again or the volume +/- buttons to turn
off the mute.
Press volume + or – buttons to adjust the volume. The
OSD message below will appear:
disappear automatically 3 seconds after the volume is
adjusted.)
By pressing the magnify "+" button, the center of the
picture can be magnified. Press the button again, and the
image will be further magnified (to a maximum of 4X).
Press the magnify "-" button, and the size of the magnified
image will be reduced by 50 percent. To return to the
normal display mode, press the "Return" button.
(The message will
English 19
Advertisement
Table of Contents
