Table of Contents
Advertisement
Connecting the Box
Please follow the instruction here to place the AV box:
Figure 28 Bottom View of AV box
To attach the AV box to the unit
Figure30 Connecting the Box
Downloaded From projector-manual.com BenQ Manuals
Figure 29 Side View of AV box
1. Precisely place the two chocks at the lower surface of the
AV box into the lower slots in the correspondent position in
the projector.
2. Slowly push the box to fit the unit and, meanwhile, insert
the box plug into the A/V connector closely.
3. Plug in the correct cord into the correspondent jack or
port to perform A/V function.
4. Select inputs by pressing "Source" key, and select channel
by the channel up or down keys.
English 25
Advertisement
Table of Contents
