Table of Contents
Advertisement
B
Image Page
Select the Image sub-page and the first item, "Auto Resize" will be highlighted. There are five items on
this page: Auto Resize, H. Phase, H. Size, H. Position, and V. Position (Fig. 23).
If AV box is attached and the input is from Video other instead of PC, another different IMAGE sub-page
including Image Ratio, System ,Color and Tint will come out as figure 24.
Figure 23 Image sub-page.... Only available when
the input signal is PC
Auto
Resize
H. Phase
H. Size
H.Position
V. Position (move the image down)
Image Ratio
System
Color
Tint
Tint may not be adjusted with PAL/SECAM video signal input
Downloaded From projector-manual.com BenQ Manuals
When Auto Resize is on, the projector determines the best fit of the image to the
screen.
If flicker occurs on a projected image, users may try to adjust the H. Phase manually.
If the projected image is too wide or too narrow for the screen, users may turn Auto
Image off and adjust the H. Size manually to fit the screen size.
(move the image left)
The Auto Image should be turned off to activate the H. Position item. Position
adjustments are saved when the projector is power off.
Position adjustments are saved when the projector is power off.
4:3 (Normal)
To select the input video system standard. When an AV box or turner box is
attached, the projector will automatically detect the video system. Users also can
select desired video systems. When selecting system, the projector will detect the
selected system simultaneously, and the OSD will still exit on the screen. The default
setting of System is "Auto" (See Figure 29).
(Less)
(Red)
Figure 24 Image sub-page – Only available when the
input signal is from video, S-video, TV or CATV
Setting effects
16:9 (Wide)
(More)
(Green)
(move the image right)
(move the image up)
Source is Video or S-Video
English 17
Advertisement
Table of Contents
