Wizard; Logging On To The Zxv10 W300 Device - Zte ZXV10 W300 Quick Installation Manual

4 Wizard

You need relevant technical knowledge and experience for configuring
the ZXV10 W300 device. To simplify your operations, it is
recommended to use the wizard for quick configuration. A little
configuration will allow you to establish the connection for basic use.
However, to use advanced functions of the device, you need to configure
other options.
Make sure the following issues before configuration:
The computer has been connected to the Ethernet port of the
device using a network cable.
TCP/IP is set properly on your computer.
All the running firewall and VPN software have been closed.
The proxy server setting of the browser you use, e.g. IE, has
been disabled.
Your service provider has provided you with required data. You
can contact your service provide for help.
Notes ZXV10 W300 wireless ADSL/LAN router can be used as
ADSL router or LAN router. So the software include ADSL and
LAN setup interface. When used as LAN router, users should not
set the VPI and VCI.

4.1 Logging on to the ZXV10 W300 Device

The ZXV10 W300 device provides a web-based configuration tool that
allows you to configure and manage the device via a web browser. Open
IE. Type in http://192.168.1.1 into the address bar and then press the
Enter key. A login page as shown below appears.
16