Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for EXMITTER EX2
Summary of Contents for EXMITTER EX2
- Page 1 EXMITTER -- Professional Remote Control Products Expert...
- Page 2 Age Recommendation: Not for Children under 14 years. This is not a toy. EXMITTER EX2 Digital Radio System...
-
Page 3: Safety Precautions
TRANSMITTER DETAILS Steering Trim Throttle Trim Antenna 5:5 / 7:3 Switch Throttle Reverse Steering Reverse ON/OFF Steering Rate Indicator LED Bind Button Simulator Cable Slot Steering Wheel Throttle Trigger EXMITTER EX2 Digital Radio System... -
Page 4: On/Off Switch
Counter-clockwise will reduce the range of rudder movement. Adjust to suit your driving style S t e e r i n g R a t e and preferences. Knob EXMITTER EX2 Digital Radio System... -
Page 5: Steering Trim
Mount the antenna up and away from the vehicle in an antenna tube. The higher up the antenna is, the better signal it will receive. CAUTION: Do not cut the antenna. EXMITTER EX2 Digital Radio System... -
Page 6: Receiver Connection
FAILSAFE Setting The EX2 comes with the receiver failsafe set to NONE. In the event of loss of signal the motor will stop and the vehicle willdrift. If the signal is regained normal function willreturn. If you wish to program the failsafe to a custom setting just follow these simple steps: 1. -
Page 7: How To Operate Your Vehicle
Rotate the steering wheel clockwise while holding the trigger to turn right. If the steering is not tight enough, increase the travel volume by rotating the travel rate knob clockwise till you reach the desired amount. EXMITTER EX2 Digital Radio System... - Page 8 -- Consult the dealer or an experienced radio/TV technician for help. 0890 Company Name: VOLANTEXRC CO., LTD. Add: 2nd Building Fuxi Dongqiao Industrial Park, Shanzhang Road Shantou, China Product Name: RADIO CONTROL PRODUCT Item No: V792 EXMITTER EX2 Digital Radio System...
Need help?
Do you have a question about the EX2 and is the answer not in the manual?
Questions and answers
My receiver does not respond to the bind plug. This joins the two outside connectors. The LED flashes about once a second. It's the same rate with bind plug fitted then powered on. The transmitter is turned on with bind button pressed and on releasing I hear several beeps. But nothing changes on receiver. I've tried 2 bind plugs. EX2 system with hand held controller. Help!
If your EXMITTER EX2 receiver does not respond to the bind plug and the LED flashes once a second, you should rebind the transmitter and receiver by following these steps:
1. Turn off the transmitter.
2. Insert the bind cable into the bind channel slot on the receiver.
3. Power on the receiver.
4. Within 5 seconds of powering on the receiver, turn on the transmitter while pressing the bind button.
5. Release the bind button and wait about 5 seconds.
6. Once the receiver stops blinking, binding is complete.
7. Remove the bind cable from the receiver.
Do not leave the bind cable inserted after binding is complete.
This answer is automatically generated
@Mr. Anderson