Advertisement
Setting up and Tuning the Modulator
Perform
the following
steps after your multi-room
distribution
system
has been connected
properly.
1
2
3
Connect
the output
(mini-jack) of the power supply
to the modulator
unit and plug the power supply
into a 110 V AC wall outlet.
The green LED Power indicator
should
illuminate.
If it does ngt_.......
recheck all power connections.
Turn on the main TV. The mode of your TV (CATV or antenna)
will determine
the "in-house"
chan2nels you will use.
If antenna,
you will use UHF channels
between
14 and 35
inclusively.
Q
If cable, you will use CATV channels
between
54 and 86
inclusively.
Refer to your notes made of channels delivered
to your home
(page 7).
Select your "in-house"
channels
and make a written
note of what
they will be. Select a channel
for the second video source
even if
one will not be used.
Highest Channel
65
For CATV: use channels
higher
than that of your notes.
Set INPUT 1
Set INPUT 2
54
56
67
69
For antenna:
select any of the unused
channels
provided
that
they are at least one unused
channel
apart from one another
and
at least one unused
channel
away from a channel with a picture.
Highest Channel
15, 16, 17, 20,
24, 25, 26
Set INPUT 1
16
Set INPUT 2
26
14,15,19,20,21
14
_20
Installation
Instructions
11
Advertisement
