Table of Contents
Advertisement
DUET
Main Menu Messages
Message
xxxxxxxx PreRoll
xxxxxxxx ON yyyy
hh:mm:ss.ff pp%
Main Menu KEY Functions
Key
UP
DOWN
Hold SELECT and UP
RIGHT
Left
(Indicates the last eight DTMF tones and
GPI state for the Network, Auxiliary,
CBD and White Line). The tones
displayed in the top row are for either
external audio connections or Analog
CBD tones. The bottom row displays the
digital subcarrier decoded tones only.
Hold RIGHT, ESCAPE and MODE keys
simultaneously to reset the unit.
(Pressing the reset button on the front panel also
resets the Soloist 2)
END Insert
Press enter to end the current insert. This will end an insert regardless of how it was started. Be careful,
there is no double prompt for this option as it was designed to perform immediate insert termination.
Launch Insert
Launches an insert as if a tone or GPI match occurred. If a Network Setting and Break Setting is
available, an insert will occur based on those parameters.
3/22/00
ADTEC, Inc.
VERSION 4.0
Description
xxxxxxxxx Pre Rolling (x represents Spot ID)
xxxxxxxx ON yyyy (x represents Spot ID and y represents the Network
Name). Displayed on the top row during an insert.
Spot running time code in hours, minutes, second and frames and
percentage of playback completed. Displayed on the bottom row
during an insert.
Display
Increases LCD brightness
Decreases LCD brightness
Firmware version and Date Code
Reserved
Top Row: tttttttt N-H A-H (t represents the last eight tones) N
is the Network GPI state and A is the Auxiliary GPI state.
GPI options are H for High and L for low.
Bottom Row: tttttttt C-H W-H (t represents the last eight
tones) C is the CBD GPI state and W is the White Line GPI
state. GPI options are H for High and L for low. The CBD GPI
is for 19 kHz tones used by MTV and VH1.
This key function provides a soft reset of the Soloist 2 and
DUET.
V4.0-6
MPEG 2 DIGITAL INSERTER
!!!!!!!!!!!! RESET SEQUENCE !!!!!!!!!
KEYPAD
USA
Advertisement
Table of Contents
