Mounting - Danfoss Termix One Solar Operating Manual

Operating guide

4.0 Mounting

4.1 Mounting
Installation must be in compliance with local standards and
regulations.
District heating (DH) - In the following sections, DH refers to the
heat source which supplies the substations. A variety of energy
sources, such as oil, gas or solar power, could be used as the
primary supply to Danfoss substations. For the sake of simplicity,
DH can be taken to mean the primary supply.
Connections:
1. Domestic cold water (DCW)
2. Domestic hot water (DHW)
3. Buffer Tank (BT) supply
4. Buffer Tank (BT) return
5. Hot water circulation (HWC) - (Optional)
Connection sizes:
G ¾" (int. thread)
BT:
G ¾" (int. thread)
DCW + DHW + HWC:
Dimensions (mm):
Without circulation and cover:
H 760 x W 312 x D 155
Without circulation and with cover:
H 760 x W 315 x D 165
With circulation and without cover:
H 935 x W 410 x D 190
Weight (approx.): 20 kg
Danfoss District Energy
Termix One Solar
VI.CW.K4.02 / LUK38004
Authorized personnel only
Assembly, start-up and maintenance work must be performed by
qualified and authorized personnel only.
The pipe placement can deviate from the shown drawing. Please note
the markings on the station.
DEN-GT 5