Starter Rope Check - Honda BF2.3D User Manual

MAINTENANCE
GEAR OIL BOTTLE
2. Allow the used oil to drain
completely, then install an oil pump
adapter in the oil drain hole. If
water or contaminated
(milky-colored) oil flows out the
drain hole when the bolt is
removed, have the outboard motor
checked by authorized Honda
Marine dealer.
3. Add oil through the oil drain hole
until it flows out the oil level hole,
then install the oil level bolt, oil
drain bolt and new washers.
54
OIL LEVEL BOLT TORQUE:
3.5 N·m (0.36 kgf·m , 2.6 lbf·ft)
Avoid losing more than 30 cm
oz, 1,1 Imp oz) while reinstalling the
drain bolt.
OIL DRAIN BOLT TORQUE:
3.5 N·m (0.36 kgf·m , 2.6 lbf·ft)

Starter Rope Check

3
(1 US
Check the starter rope every 6 months
or after every 50 hours of outboard
motor operation.
Replace the rope if it is frayed.
STARTER ROPE